Multifunctional fruit and vegetable peeling machine, mainly composed of motor, hair roller, spray system, generally 9 rough hair rollers, when cleaning, just put the material into the washing machine, there is a spray pipe above the washing machine, through the hair The rotation of the roller peels the carrots. At the same time, the spray pipe above the spray pipe is cleaned and peeled clean, which greatly saves labor. It is widely used in agricultural and sideline product processing and restaurant canteens. Nine large brushes are installed in the hair roller cleaning machine, and a spray water pipe is installed on the top. The material rotates with the brush during the cleaning process and then is rinsed by the spray water on the top to perform manual scrubbing to achieve the effect of peeling. The screw discharge port on one side of the equipment can be cleaned while discharging, or it can be discharged once after cleaning. This equipment saves water and has a large cleaning capacity. It is especially suitable for large and medium-sized food processing industries, pharmaceutical industries, clean vegetable distribution, etc. Batch assembly line work.
Multifunctional fruit and vegetable peeling machine is made of high-quality 304 stainless steel, the equipment is durable and corrosion-resistant. The cleaning time of materials can be controlled according to different materials. After cleaning, the material can be transported out by the rotation of the wool roller. There is a spray device at the upper end of the cleaning to wash off the mud of the friction material. Sewage can be collected uniformly at the bottom.
The machine has the characteristics of low energy consumption, small size, lightweight, beautiful appearance, and convenient operation. The box body is made of high-quality stainless steel, which is not rusty, clean, and hygienic. The hair roller is not easy to deform, and the brush is rolled with a nylon cord, which is durable.
1. When the upper positioning pin cannot be inserted into the melon, the first is to check whether the pressure reducing valve inside the machine has air pressure, and the second is to check whether the pressure reducing valve air pressure is enough. If it is not enough to adjust, turn left to increase.
2. If there is water at the bottom of the pressure reducing valve, lift the needle at the bottom of the pressure reducing valve by hand.
3. The bearing on the top of the machine and the threaded rod in the middle should be lubricated once every quarter.
4. The air compressor should be drained every 12 hours of operation.