Good prices small manual hand press machine is suitable for cutting, punching automatically. This machine is applicable for the continuous die-cutting of various non-metallic coil materials using the molded cutting die in apparel, shoes, cap, case, bag, toy, medical instrument, sports, packing, and other industry areas.
Good prices small manual hand press machine with lean, good quality, the body of steel material, stable and reliable. The factory floor is an essential common tool, the main bearings and pushed hard with the workpiece use. The table has four mounting holes, for a variety of workpieces.
Good prices small manual hand press machine is a general-purpose press, suitable for forming, blanking, punching, bending, and another cold stamping process.
C-frame Casting fuselage, maximum rigidity, and minimum deflection for accurate parts and long tool life. the body can be tilted, high rigidity, and less deformation Compact. Thick plates and large columns provide you with the stable platform you need for your demanding application.
Good prices small manual hand press machine uses a Rigid rotated bond clutch rigid and well supported. The clutch gives continuous strokes for mass production. The crankshaft is made of special alloy steel machined to close accuracy and fitted in bronze bushes for smooth working, longer life & accuracy.
Good prices small manual hand press machine properly sized flywheel is made of high grade cast iron, for storing and releasing adequate energy for the pressing operations, and properly balanced for smooth running. The gear is of steel cast or fabricated. Gear teeth are generated by a precision hobbing machine. The machine is with both hands button and footswitch control: anti-tie down, non-repeat controls with ring guards; conforms to OSHA. Protective fence and the safety interlock to ensure operation safety. Have a movable single-hand pedal switch, easy to operate.
Good prices small manual hand press machine pressing die cannot be used for pressing powder with a particle size of < 30 microns. Small particles may slip into the gap between the pushing rod and steel sleeve and cause damages to the sleeve during the compression. Ball mill and sieve the powder and apply only the 32~75 microns power to the pressing die to avoid damages.