Home > News > Correct operation of rice and wheat/corn threshing machine

Correct operation of rice and wheat/corn threshing machine


2020-12-18


The launch of diesel or electric belt medium-size rice and wheat/corn threshing machine has changed the traditional manual labor method and freed farmers’ friends from heavy manual labor. The equipment is separated by sieve holes, and there is a baffle at the lower part of the feeding inlet to prevent the falling corn kernels from splashing and hurting people.

The launch of a diesel or electric belt medium-size rice and wheat/corn threshing machine is a major advancement in the agricultural machinery market. Users can choose the equipment that suits them according to their requirements. Hexie rice, wheat, and corn thresher is a small household corn thresher and a must-have product for every household. This kind of corn threshing and peeling machine is small in size. The corn peeling machine can also be called a corn peeling machine, corn peeling machine, corn peeling machine, etc. It is efficient and easy to move. It is the first choice for farmers to thresh corn.

Speed selection of rice and wheat/corn threshing machine

The speed of diesel or electric belt medium-size rice and wheat/corn threshing machine should not be too fast. It should be used at the speed specified in the instruction manual, and the speed cannot be increased arbitrarily. Generally, it is 28-32 m/s for wheat removal, 24-26 m/s for indica rice, and 26-30 m/s for japonica rice. If the rotation speed is too high, not only will it not take off fast, but it will cause serious crushing of the grain, shorten the service life of the machine, and increase the unsafe factors. It is necessary to install a matching electric motor or diesel engine according to the requirements or the signs on the machine, and be equipped with a suitable pulley, and be careful not to install the reverse direction. The fan rotating pulley can not be installed reversely, otherwise, it will affect the cleanliness of the grain.

For diesel or electric belt medium-size rice and wheat/corn threshing machine, more farmers are freed from the heavy manual labor of corn, which is very popular among farmers. When using a large corn thresher for the first time, pay attention: before using the agricultural machinery, clean, check, lubricate, adjust, tighten, repair, and replace according to the requirements of the agricultural machinery manual. Before use, it must be carefully checked whether the transition part is sensitive and not bumpy, whether the conditioning organization is normal, and whether the safety equipment is completely useful. To ensure that there is no debris in the machine, add lubricating oil to the smooth parts. The thickness of the upper cover of the ordinary corn peeling and thresher is 5, the weight is 85 kg, the net rubber length is 74 cm, and the middle two are all iron. The thickness of the upper cover of the thickened corn peeling and thresher is 75, the weight is 114 cm, the net rubber length is 84 cm, and the middle two are half rubber and half iron. Before running the agricultural machinery, you can touch it with your hands or try some parts of it to see if there is any looseness or other looseness. If there is any, it should be eliminated in time. The thresher is out of order during operation.

Correct operation of rice and wheat/corn threshing machine

Diesel or electric belt medium-size rice and wheat/corn threshing machine should be fed continuously and evenly when threshing. Excessive feeding will cause the drum load to be too large, the rotation speed will decrease, the removal rate and productivity will decrease, the stalks will carry more grains, and the threshing quality will decrease. In severe cases, it will cause blockages and machine damage. Feeding volume is too small, productivity is low, and sometimes it will affect the removal rate. The indicators of clean stripping, quick stripping, less breakage, and low energy consumption are actually mutually restrictive. If it is to be cleaned well, the crushing rate will increase, productivity will also decrease, and energy consumption will increase.

Diesel or electric belt medium-size rice and wheat/corn threshing machine is composed of a certain number of iron bars, two main beams, and two auxiliary beams. The gap between each two iron bars can jam the corn and then rotate quickly The spiked drum will forcibly thresh the stuck corn. Of course, the grid-type recessed plate is immovable whether it is working or installing. After the corn is threshed, the corn kernels are passed through the grid-type concave plate, leaking from the gap of the concave plate, and slide out of the body along the inclined slide plate, in order to separate the corn from the corncob. Frame part: The frame is composed of the left frame, the right frame, the discharge port, the lower slide plate, and the stable main beam. The frame is the main support of the small corn thresher, which bears the main weight of the small thresher And power, load, and moment, so its design is a strong but not weak part. The two parts of the frame must be stable and relatively fixed so that the machine will not shake or skew during operation, which may cause personal danger. Therefore, in order to make the frame strong, this medium-size rice and wheat/corn threshing machine The design is made of three mm thick angle iron.

Send your message to this supplier

*From:
*To:
Mr Lio
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? See all products

Want to get quotations

  • Name *
  • E-mail *
  • Tel
  • Country
  • Message *
x