Multifunctional porous fruit and vegetable cutting machine double frequency conversion speed control, large fruit slicer safety control system, multifunctional fruit slicer effectively protects improper operation personnel. The whole machine is made of high-quality stainless steel. The fully automatic fruit and vegetable cutting machine complies with national food standards and is fully adapted to various complex environments. The dial of this machine drives the object to be cut to rotate at a high speed, using the centrifugal force of the object. If the automatic fruit and vegetable cutting machine is inconsistent, adjust the power cord.
When the large-scale fruit slicer is running, there should be no shock, vibration of the multi-function fruit slicer, and abnormal sound. The belt is changed to the tower as needed and then tightened. The automatic fruit and vegetable cutting machine use speed control to put the gloves into the speed control screw square head. The large fruit slicer rotates clockwise to increase the speed. After powering on, press the start button, and then according to the actual For cutting length requirements, slowly adjust the knife set knob and conveyor belt knob.
Multifunctional porous fruit and vegetable cutting machine turn on the power switch on the electrical box. The button depends on whether the operation button is correct. The multifunctional porous fruit and vegetable cutting machine runs without error. Check that all parts are normal. Individual vegetable shreds cut by the large fruit slicer become thicker or even cut. It is the latest development of our factory using digital technology. The automatic fruit and vegetable cutting machine is mainly used for cutting various stems and leaves of soft vegetables.
Multifunctional porous fruit and vegetable cutting machine is mainly composed of frame, conveyor belt, vegetable pressing belt, slicing mechanism, speed control box, or tower wheel speed control mechanism. The centrifugal slicing mechanism is used for slicing hard fruits and vegetables. The slice thickness can be adjusted freely within a certain range. The vertical knife part can process leaf soft vegetables or cut slices into blocks, cubes, diamonds, etc. of different specifications. shape. The cutting length can be adjusted arbitrarily within a certain range through the “adjustable eccentric wheel”. Because the vertical knife simulates the principle of hand-cutting vegetables, the processing surface is flat and smooth, the shape is regular, and the cut vegetables are well organized and kept fresh.
Multifunctional porous fruit and vegetable cutting machine When the material is pressed by the feeder to the moving knife plate, the knife plate cuts the material into slices, and then the slices are pressed against the fixed knife plate by the inclined surface under the blade of the moving knife plate. Stainless steel small vegetable cutting machine The blades or square blades listed in parallel on the fixed cutter plate divide the slices into strips or granules, and then dial out by the material dial. The new food machinery is made of stainless steel, beautiful in appearance, clean and hygienic, and is an ideal vegetable processing equipment.
1. Trial cutting before work and observe whether the specifications of the cut vegetables are consistent with the required specifications. Otherwise, the slice thickness or cutting length should be adjusted, and normal work should be carried out after meeting the requirements.
2. Install the vertical knife. Rotate the adjustable eccentric wheel to make the knife holder reach the bottom dead center, then lift the knife holder up by 1/2 mm, make the vertical knife contact with the conveyor belt, tighten the nut to fasten the vertical knife on the knife holder. Note: The lifting height of the knife holder can be controlled according to the vegetables being cut. If the raised height of the elevated rack is small, the vegetables may be connected to the knife. If the elevated height of the elevated rack is too large, the conveyor belt may be cut.
3. Adjust the length of cutting vegetables: Turn the adjustable eccentric wheel, loosen the connecting rod fastening screw, and cut the thin wire to move the fulcrum, from the outside to the inside. When cutting thick wire, you can move the fulcrum, from the inside to the outside, and tighten the adjusting screw after adjustment.