Home > products > Candy Machinery > Rotary single punch camphor moringa maker tablet press machine

Rotary single punch camphor moringa maker tablet press machine

Min. Order / Reference FOB Price
1 Set/Sets CN¥4,914.21 - CN¥7,013.28 / Set
Port: Qingdao/Shanghai
Supply Ability: 900 Set/Sets per Month
Payments: Direct payment from an online Bank,Pay later,On line bank,Visa
Type: Single Punch
Dimension: 580*450*625mm
Weight: 70kg
Place of Origin: Henan, China
Certification: CE/ISO9001
Applicable Industries: Food & Beverage Factory, Farms, Restaurant, Home Use, Food Shop

You Might Also Like

Loading...

Basic Info.

The rotary single punch camphor moringa maker tablet press machine is mainly used for the tablet technology research of the pharmaceutical industry. The tablet press presses the granules into circles, special shapes with a diameter not greater than 13mm, and automatic continuous production equipment with characters, symbols, and graphic granules. Some pharmaceutical tablet presses have burrs and dust during tablet compression. They should be matched with a sieve machine to remove dust at the same time and must meet GMP regulations.

Features of maker tablet press machine

1. The equipment is light and beautiful, compact in structure, made of stainless steel and easy to clean.
2. Humanized design, easy operation, labor-saving, more suitable for laboratory use.
3. Small footprint, bottom casters, easy to move. Only 220V voltage, in line with the distribution of most laboratories.
4. The tablet has a fast forming speed and a high output, which can realize continuous production, which can reach 65 pieces/minute, which can meet most of the needs.
5. A wide range of applications can be customized according to customer needs in various forms of mold, can be pressed round, square and other special-shaped parts. Ordinary wafer diameter up to 18mm. Filling depth up to 17mm.
6. Adjustable, adjustable tablet weight, thickness, hardness, and other indicators to meet various tableting requirements. Can produce materials as low as 3 grams! Especially suitable for laboratory customers.

Installation and wiring of maker tablet press machine

1. The tablet press is installed on a solid wooden table and fixed with three M12 anchor screws. The body size from the work surface to the ground is about 600 mm (in terms of hand cranking and easy operation).
In order to facilitate disassembly and repair, there should be a hole with a diameter of about 35 mm on the wooden worktable corresponding to the position of the lower punching rod.

2. Before connecting the motor source, connect the motor to the ground wire to ensure safety.
Then remove the V-belt, turn on the power of the motor, and start the motor to observe whether the motor rotates in the correct direction. If the direction of rotation is incorrect, wire it separately, and then install the V-belt.
The tablet compression machine has a small volume, high pressure, and high-pressure control accuracy. It has been used in scientific research, teaching, testing, pharmaceutical, catalysis, chemical industry, and other industries.

Send your message to this supplier

*From:
*To:
Mr Lio
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? See all products
  • Name *
  • E-mail *
  • Tel
  • Country
  • Message *
x